Use EcoClean in its paste form for the following;


  • Surface Rust
  • Overspray
  • Scuff Marks
  • Road Tar
  • Oxidation
  • Tape Residue

Oxidation – Buff as a compound with buffing wheel, mix 1 pint to 1 gallon).

Tape Residue – Use full strength and allow to stand a few minutes.

– For quick removal use with Scotch Brite scouring pad.
– For easily scratched surfaces, use a very fine steel wool pad.

Hand Protection – Protects against:

  • Paint
  • Gasket Sealer
  • Silicone
  • Adhesives
  • Grease
  1. For hand protection use EcoClean full strength.
  2. Coat entire hand.
  3. Wait 30 seconds or until completely dry.

 Contains no lanolin or silicone.  Won’t transfer and safe for painters.

Defogging Glass – (Apply full strength & buff dry with a clean towel until clear)

  • Windshields
  • Eyeglasses
  • Bathroom Mirrors
  • Scuba Masks
  • Motorcycle Helmets
  • Plexiglass

Can use on all types of glass.  Won’t etch surface.  No ammonia or petroleum.

Spots on Fabric

  1. Pace a clean towel underneath spot.
  2. Use EcoClean in paste form on a dry, clean cloth and rub gently, directly on spot, until removed.
  3. Rinse.

Hand Cleaner – (5oz. to 1 quart hot water)

– Won’t whiten or dry out skin.
– Use in standard dispenser.
– Will thicken when allowed to stand.